home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
QRZ! Ham Radio 4
/
QRZ Ham Radio Callsign Database - Volume 4.iso
/
files
/
dsp
/
56ktools
/
a5611.tz
/
a5611
/
README
< prev
next >
Wrap
Text File
|
1992-08-11
|
5KB
|
144 lines
a56 - a DSP56001 assembler - version 1.1
/*
* Copyright (C) 1990-1992 Quinn C. Jensen
*
* Permission to use, copy, modify, distribute, and sell this software
* and its documentation for any purpose is hereby granted without fee,
* provided that the above copyright notice appear in all copies and
* that both that copyright notice and this permission notice appear
* in supporting documentation. The author makes no representations
* about the suitability of this software for any purpose. It is
* provided "as is" without express or implied warranty.
*
*/
V1.1 CHANGES
Many thanks to Tom Cunningham at Motorola who noted several bugs, fixing
most of them. Thanks also to Stephen Edwards at CalTech for his fixes as well.
Both he and Tom fixed up the XY parallel move code; I believe all the
fixes are integrated.
Summary of changes since v1.0:
- Jcc, JScc, Tcc recognizes "CC" synonym for "HS" (Tom)
- LUA syntax fixed (Tom, Stephen)
- DIV syntax fixed (Tom)
- XY move fixed (Tom, Stephen)
- a56 now detects phase errors (changes in symbol values
between pass 1 and 2)
- several causes of phase errors fixed
- immediate value handling improved for both integer and
fixed-point values
- symbols have type (INT or FLOAT)
- cpp droppings are properly handled
- ALIGN pseudo-op added
Known bugs/deficiencies:
- MOVE to a control reg generates bogus code (always use MOVEC,
MOVEM, and MOVEP)
The example code has been cleaned up a bit and I've included my
56K board's envelope code - tdsg.basic.a56. This code is specific to
my implimentation.
A note on the reverb code - I have since found since posting version 1.0
that the reverb code has a great-big almost-DC bumb in its impulse
response. I found this after doing some simulations. I suspected something
was wrong because I had to scale the output of the comb filters by .046
or something before going into the two all-pass stages. Overall I think it
works better without the 1.7 ms all-pass. There's another reverb example
on Dr. Bubb that fits Moorer's 1979 model better. I've included this in
the examples but I have not yet assembled or tried it.
OVERVIEW
This program was written as a vehicle to learn the intricacies
of the DSP56001 instruction set, and to provide a tool for Unix-based
DSP code development (for those of us without a NeXT machine.)
The intent was to provide compatibility with Motorola assembler's syntax.
But since the author did not have Motorola's assembler or its documentation,
it is no doubt far from compatible. Only a few pseudo-ops are implemented--
probably only partially.
Macros are not supported, except through the use of an external macro
preprocessor, such as /lib/cpp. To facilitate cpp macro expansion, multiple
assembler statements on a single input line are delimited with an '@', e.g.:
#define JCHEQ(c,label) move #c,x0 @cmp x0,a @jeq label
#define JCHNE(c,label) move #c,x0 @cmp x0,a @jne label
SUPPORTED PSEUDO-OPS
The following is a list of the pseudo-ops that are recognized:
<symbol> = <expression> ;assign a symbol
ALIGN <number> ;set location pointer
;to next integral
;multiple of <number>
ORG <space:> <expression> ;new location pointer
ORG <space:> <expression>, <space:> <expression>
DC <dc_list> ;declare constants
PAGE <number>, <number>, <number>, <number> ;ignored
INCLUDE <file> ;file inclusion
END ;end
In addition, a "PSECT" pseudo-op was implemented. It allows program sections
to be defined and bopped in and out of, each with its own location counter and
space. The Motorola assembler probably does not have this pseudo-op, but no
doubt supports the concept in some way.
PSECT <name> <space:><begin_addr>:<end_addr> ;define
PSECT <name> ;switch to psect <name>
FUTURE DIRECTION
The assembler probably generates bogus code here and there, and no doubt
does not handle all of the syntax. I welcome all comments, fixes and
enhancements.
TO MAKE AND USE
Type "make". gram.c and lex.yy.c are provided for those without yacc
(or bison) and/or lex.
The resulting program, a56, is used as follows:
a56 [-b] [-l] [-o output-file] file [...]
An assembler listing is sent to the standard-output and an ascii-formatted
object file (a56.out) is produced. The "-b" option adds binary to the listing.
"-l" causes included files to be listed. "-o" directs the output to the
specified file rather than the default, a56.out.
A separate program, toomf, converts a56.out into "OMF" format suitable for
downloading to the 56001 via the sloader.a56 program.
toomf < a56.out > file.omf
AUTHOR
11/28/91
v1.1 8/6/92
Quinn C. Jensen
1374 N 40 E
Orem, UT 84057
home: jensenq@qcj.icon.com (preferred address for a56 correspondence)
work: jensenq@npd.novell.com 801-429-3170